EAND Get a quote
Galvanised scaffold tube stacked in the EAND workshop, Leting
Ringlock tower — 3D model of the assembled system
Production · Leting System model · tower

Built to
your standard.

RINGLOCK 48 / 60Q355BHOT-DIP GALVANISED300,000 t / YEAR
See what we declare
SCROLL

One site draws the tube, welds the standard, galvanises the batch and packs the container. Nothing is subcontracted to a second yard.

300,000
tonnes of ringlock and tube a year, out of Leting.
180
mu of plant (12 ha)
60,000
m² workshop floor
130+
machines on site
1,000
containers a year
EN 12810
EN 12811
EN 39
EN 1065
BS 1139
AS/NZS 1576
OSHA 1926
SASO / SABER
EN ISO 1461
EN 12810
EN 12811
EN 39
EN 1065
BS 1139
AS/NZS 1576
OSHA 1926
SASO / SABER
EN ISO 1461
Every order is declared against the standard named in your enquiry — EN 12810-1 / EN 12811-1 for ringlock, with the conformity document and test reports attached. No badge on a brochure, no number we cannot verify.
Certified management systems
ISO 9001:2015 · Quality
68626Q00323R001

Scaffolding fabrication. First certified 02 Aug 2024, this certificate issued 22 Jul 2026, valid to 01 Aug 2027.

ISO 14001:2015 · Environment
68626E00067R001

Scaffolding manufacturing and environmental management activities. Same cycle: certified 2024, reissued 22 Jul 2026, valid to 01 Aug 2027.

ISO 45001:2018 · Health & safety
68626S00061R001

Scaffolding manufacturing and occupational health and safety management activities. Valid to 01 Aug 2027.

Issued by Zhongbeifang Certificate Service (Beijing) Co., Ltd. — CNAS C375-M, IAF MLA. Surveillance audit of 22 Jul 2026 found all three systems maintained. Surveillance notice (PDF). Every number above can be checked with the issuer.

Ringlock support frame carrying slab formwork — 3D model of the assembled system
Slab forming on our own ringlock. 3D model of the assembled frame — not a site photograph.

The node

One disc.
Eight holes.
No bolts.

NODE / 1:4

60 series.
When facade duty
is not enough.

Bridge decks, industrial shoring, refinery staging. Ø60.3 standards and heavier walls carry the load — same node geometry, so a crew already running 48 series needs no new tools.

Ringlock standard with specification label printed on the tube
Size and standard printed on the tube before it leaves the line.
ComponentSeriesTypical lengthTubeSteel
Standard481000 – 3000 mmØ48.3 × 3.2Q355B
Standard601000 – 3000 mmØ60.3 × 3.2Q355B
Ledger48 / 60300 – 2400 mmØ48.3 × 3.2Q355B
Diagonal brace48 / 601500 × 2000 mmØ48.3 × 2.5Q235B
Steel plank—1500 – 2400 mm1.8 mm deckS235

Typical range for selection. Final lengths, wall thickness and galvanising class are fixed against the order drawing. Custom lengths and OEM marking from 1,000 pieces.

Bill of parts

Ten parts make a lift. Every one of them is drawn, welded and galvanised on the same site — no second supplier in the chain. All ringlock parts are declared against EN 12810-1 / EN 12811-1.

Standard · 48 — EAND ringlock component
Standard · 48
Ø48.3 tube · Q355B · HDG
Vertical that carries the load. Rosettes welded in at a fixed module.
Standard · 60 — EAND ringlock component
Standard · 60
Ø60.3 tube · Q355B · HDG
Heavier wall for bridge and shoring duty. Same node geometry as 48.
Ledger — EAND ringlock component
Ledger
Ø48.3 tube · Q355B · HDG
Horizontal. The wedge head seats into a large rosette hole.
Diagonal brace — EAND ringlock component
Diagonal brace
Ø48.3 × 2.5 · Q235B
Hooks the small holes. This is what stops the bay from racking.
Rosette — EAND ringlock component
Rosette
Welded to the standard · HDG
Eight holes — four large, four small. Nothing else to line up.
Wedge head — EAND ringlock component
Wedge head
Cast · HDG
Tapered and gravity-set. Load tightens it, so it cannot walk out.
Joint pin — EAND ringlock component
Joint pin
HDG
Joins one standard to the next, lift on lift.
Base jack — EAND ringlock component
Base jack
Screw jack · HDG
Sets the level. Screw thread on a base plate.
Steel plank — EAND ringlock component
Steel plank
1.8 mm deck · S235
Hooked ends, laid on the ledger, one lift at a time.
Ladder — EAND ringlock component
Ladder
HDG
Access between lifts.

Photographs are of EAND parts. Dimensions and wall thickness are fixed against the order drawing, not against this page.

Send the drawing. Get the loading plan.

01
Send your drawing or take-off
Bill of materials, standard, discharge port.
02
Selection and price
System mix and unit price, replied within 24 hours.
03
Loading plan and slot
40HQ / 20GP plan with weights, production slot confirmed.

Project references

Where the systems
actually stand.

National Stadium
"Bird's Nest"
Beijing · 2008 · roof & event structures
National Centre for
the Performing Arts
Beijing · stage & roof support
Ziya River Bridge
Tianjin · bridge shoring
Beijing 2022
Winter Olympics
Service supplier
Cainiao
logistics base
Alibaba Group · warehouse construction
Daxing
Ingka IKEA
Beijing · retail construction
Water Cube
Beijing · structural support
Export markets
LATAM · GCC · SEA · ANZ · CIS · Africa

Overseas references are released under NDA. We do not borrow another factory's site photographs.